Kinglab Instruments Private Limited

·      Digital LCD backlight Display

·     Big Size Ceramic hot plate with flame protection and durability

·     Heating and stirring can proceed simultaneously.

·     Temperature & Stirring speed is stepless adjusted.

·   Real temperature & speed display on the screen simultaneously

· Two sensors, outside PT 100 sensor controls the liquid temperature inside K type sensor control the hot plate temperature.

·      Over Temperature Alarm

• Measurement of Refractive index nD of transparent or transculents liquid and solid substance
• Measurement of Brix of sugar solution
• Prism made of hard glass
• Visual aim and LCD Display
• Automatic correction of the effective of temperature on the Brix
• Printer Interface for direct data print-out

Additional Information:

• Production Capacity: 50
• Delivery Time: 1 or 2days

SALIENT FEATURES

pH Mode: Up to 5 point push button calibration with auto buffer recognition. Selectable pH buffer standards, (USA, DIN, NIST, User Defined) resolution (0.1, 0.01, 0.001pH) temperature units (°C or °F) Automatically calculates and displays electrodes slope that helps you decide whether to replace pH electrode. Calibration due reminder prompts you to calibrate the meter regularly.

ORP Mode: Absolute or Relative mV measurement provides accurate ORP measured value. 1 point offset calibration allows user adjusts displayed value to a known standard.

Conductivity/ TDS / Salinity/Resistivity Mode: Up to 5 point push button calibration allows user to uses customized calibration solutions. Default (10uS, 84uS, 1413uS, 12.88uS, and 111.8uS) Adjustable TDS conversion factors, cell constant, temperature coefficient and normalization temperature. (20°C or25°C) allows user selects linear or pure water temperature compensation modes . In salinity measurement modes, selectable practical salinity or seawater measurement standard (ppt).

Automatic Temperature Compensation: Using the supplied temperature probe, the temperature value is displayed on the screen .the meters provides manual or temperature compensation mode for optimum accuracy under variable temperature conditions.

Viewing of Electrode Slope :Aftercalibration , the percentage slope of the electrode is displayed before the meter returns to measurement mode. Per the slope value user decides wheather the change  electrode

Multi – point push Button Calibration: The Meters have multi-point calibration mode .choose calibration and immerse electrode into indicated calibration solution press entry and meter is automatically calibrated

·         Touch and continuous operations

·         Speed range of 0-2500 RPM, stepless speed regulation

·         Used for various mixing applications with optional adapters

Specially designed vaccum suction feet for excellent stability

Additional Information:

• Production Capacity: 50
• Delivery Time: 1 or 2days

• Halogen heaters (Option : Infrared Type)
• Drying temperature up to 160°C
• Graphical display with backlight & Drying chart displaying. 
• Convenient and Easy text menu. 
• Reports edition with PC Keyboard. 
• Storing 20 drying programs.
• Equipped with  USB, RS232, PS2 Interface. 
• Free PC Software 
• Multiple profiles and analysis modes. 
• Drying Report Printing with GLP / GMP 
• GMP Analysis Parameters Memory Bank. 
• Automatic Self Test at Power up. 
• Available ways to evaluate humidity :

   - in proportion to initital weight 
   - in proportion to dried weight 
   - percentage of dried weight 

• Drying mode : 

   - time     - short ( automatic)     - Standard     - Fast     - Slow     - Step 

Microprocessor based colony counter is an instrument used to count colonies of bacterial or other microorganisms growing on a agar plate. It is designed to conveniently count or assist counting colonies of microorganisms on a plate containing a gelled growth medium. Microbial counting is useful in the basic science and used to determine the number of bacteria present for physiological or biochemical studies.

Additional Information:

• Production Capacity: KLMCC -7D
• Delivery Time: 1 & 3 DAYS

·         Readout from 0-9999999 counts

·         Counts correction facility

·         Auto Maker pen

·         Soft Touch Keypad

·         Uniform glare free illumination

·         LCD Display

Additional Information:

• Item Code: KLMCC7D
• Production Capacity: 50
• Delivery Time: 1 or 2 days

* Microprocessor based Photocolori meter * The series Advantage here of using LED based Filter instead of Glass Filters is the long life of Leds and also the selection Procedure of Wavelength are based on latest LED technology. * Built in  8 Digital Filters  30,000 Hours Life.* The instruments measures both Absorbance and % Transmittance * Wavelength Range 405 - 700 mm as it has a digital filters of wavelength 405, 450, 480, 520, 540, 578, 620 and 700 nm 

pH MODE : Up to 5 points push-button calibration with auto-buffer recognition. Selectable pH buffer standards, (USA, DIN, NIST, User-defined) resolution (0.1,0.01,0.001pH) temperature units (°C or °F) Automatically calculates and displays electrode slope that helps you decide whether to replace pH electrode. Calibration due reminder prompts you to calibrate the meter regularly.
ORP MODE : Absolute  or  Relative  mV  measurements  provides  accurate  ORP  measured  value.  1  point  offset  calibration allows user adjusts displayed value to a known standard.
CONDUCTIVITY/TDS/SALINITY/RESISTIVITY MODE : Up to 5-point push-button calibration allows user to uses customized calibration solutions. Default 10S, 84S, 1413S, 12.88mS and 111.8mS) Adjustable TDS conversion factors, cell constants, temperature coefficients and normalization temperature. (20°C or 25 °C) allows user selects linear or pure water temperature compensation modes. In salinity measurement modes, selectable practical salinity (PSU) or seawater measurement standards. (ppt)µµµ
AUTOMATIC TEMPERATURE COMPENSATION : Using the supplied temperature probe, the temperature value is displayed on the screen. The meters provides manual or temperature compensation mode for optimum accuracy under variable temperature conditions.
VIEWING OF ELECTRODE SLOPE : After calibration, the percentage slope of the electrode is displayed before the meter returns to measurement mode. Per the slope value, user decides whether the change the electrode.
MULTI - POINT PUSH - BUTTON CALIBRATION : The meters have multi-point calibration mode. choose calibration and immerse electrode into indicated calibration solution. press ENTRY and meter is automatically calibrated.
SAVE AND COMMUNICATION INTER FACE : The meters all have real-time date / clock stamps. The memory stores up to data set. Press the SAVE Key to store the current measures values and it automatically generates a serial number with the data and time. This data can then be set to a computer via the USB port

·         Fasting testing, more efficiency, can be applied in production site and laboratory. Rubber DIN volume wear loss, Akron wear loss, expansion can be reading directly.

·         Plastic particle, film, floating, sealring, rubber, calcium carbonate powder can get quick tested.

·         Rubber DIN volume wear loss, Akron wear loss, expansion can be reading directly.

·         Function of automatic zero tracking, buzzer warning, and overload warning.

·         Function of solution compensation. Necessary if liquid other than water is used as a medium for measurement.

·         Adopt the completed high-capacity measurement accessories with the transparent injection moulding sink, which can resist wear, fall off.

·         Adopt the completed professional wind proof and dust proof cover, which makes the machine convenient and durable.

·         Interface of RS-232C is included.

·         In-Built Rechargeable Battery Backup for continuous use.

·         Low Battery Indication

Additional Information:

• Item Code: KWS310D
• Production Capacity: 50
• Delivery Time: 1 or 2 days

We are offering Digital Hot Plate Magnetic Stirrer. This equipment is used in laboratory.
MICROPROCESSOR CONTROL : The KLHMS - 2000 hot plate magnetic stirrer is operated by a digital control CPU. The CPU regulates the heating up to 300°CDIGITAL SPEED CONTROL : Stirring speed is also controlled by the CPU from the keypad while the stirring speed is indicated on the bar graph.
PROGRAMABLE : 
Operator can setup the objective temperature, hold temperature, stirring time and speed.
AUTOMATIC TEMPERATURE CONTROL:
Connect the temperature probe and place into glass container being stirred to measure and maintain the object temperature. Accuracy is ±1°C

·     Advanced microprocessor based design

·     Rugged & reliable Metal hosing design

·     Highly Accurate & Easy to Operate

·     UV Cabinet accommodates two UV Source each 12” Long Rating 8 Watts.

·     UV Sources are Interlocked to prevent siultanueous short long UV radiations.

·     UV Cabinet is provided with Filter Glass

 

·        Fixed speed of 6000rpm

·        low noise < 50 dB

·        High safety by low operation voltage and lid opening system

·        Enclosed design reduces the risk of liquid splashing into the equipment

·        Excellent dynamic balance keeps stable running if the rotor is unbalanced on two sides

·        Click on designs allows for very easy rotor change without tools

·        Equipped with 2 interchangeble rotors of 1.5/2 ml x 6 and PCR 8x2

·        2 Adapter included to use PCR & MCT Tubes

·        Automatic Motor Shutdown on Opening the Cover Compact design

Additional Information:

• Item Code: MTMCF6000
• Production Capacity: 50
• Delivery Time: 1 or 2days

·        PT- 100 temperature sensor for accurate results.

·        Both side handle for easy moving.

·        Overheat protection and liquid level alarm function

·        Fast cooling, low noise, low vibration

·        Stable & reliable performance

·        Microprocessor based PID controlled results in high precision

·        Programable temperature controller

            Liquid to be used: 5°C & below: Alcohol or Anti-freeze

                                        : 5 ~ 85°C        : Pure water

                                        : 85~95°C        :15% Glycerin & water.

Additional Information:

• Item Code: KLRCB-6-12
• Production Capacity: 50
• Delivery Time: 1 OR 2 DAYS